드릴 비트,헤펠레 라픽스 20 하우징 커넥터

접시형 절단날 포함 – 목재 두께: 19 mm, 시계방향 회전

물품 번호 001.24.327

  • 정보
  • Rafix 20 and 30 System

    The Rafix 20 and Rafix 30 RTA connector systems have zinc alloy tightening elements that are based on the centric principle.

    The advantages are:

    • Secure tightening, even after repeated slackening and re-tightening
    • No displacement of side panels, because bolts are centrally guided.
    • Tolerances are compensated for by long tightening distance
    • Comfortable tightening with drive tool in 25° position
    • All drilling operations take place on a flat surface

    A comprehensive range of connecting bolts, sleeves and accessories for any installation situation is available for the Rafix 20 and the Rafix 30 connector systems.

     
  • 라픽스 커넥터 하우징 개요
  • Rafix 20 and 30 System

    The Rafix 20 and Rafix 30 RTA connector systems have zinc alloy tightening elements that are based on the centric principle.

    The advantages are:

    • Secure tightening, even after repeated slackening and re-tightening
    • No displacement of side panels, because bolts are centrally guided.
    • Tolerances are compensated for by long tightening distance
    • Comfortable tightening with drive tool in 25° position
    • All drilling operations take place on a flat surface

    A comprehensive range of connecting bolts, sleeves and accessories for any installation situation is available for the Rafix 20 and the Rafix 30 connector systems.

     
    Rafix 20
    • Connector housing made from zinc alloy or plastic
    • Connector housing without dowel
    • With tightening element for tightening and fixing of the components
    • Only one drill hole
    • Small design
    • With or without rim (zinc alloy housing available only with rim)
    • Connector housing made from zinc alloy or plastic
    • Connector housingwith dowel
    • With tightening element for tightening and fixing of the components
    • Can be used for alignment, the dowel provides accurate positioning
    • Better pull-out strengths
    • Valuable, robust appearance
    Rafix 20 Tab
    • Shelf connector housing made from plastic
    • Shelf connector without dowel
    • Without tightening element
    • With design and drilling dimensions identical to Rafix 20
    • Tightening in slightly angled position
    • Installation and removing by pushing on and lifting the connecting bolt, no tools required
    • With rim
    Rafix 30
    • Connector housing made from plastic
    • Connector housingwith dowel
    • With tightening element made from zinc alloy for tightening and fixing of the components
    • Can be used for alignment, the dowel provides accurate positioning
    • High tolerance range (± 0.5 mm), compensation through long tightening distance (2.5 mm)
    • High pull-out strengths
    • For heavy loads

    Installation

    The Rafix 20 and 30 have two types of recess to accommodate the connecting bolt:

    (1) Without ridge:

    (2) With ridge:

    The shelves can be inserted from the frontand from above.

    The shelves can only be inserted from above; The cabinet elements are therefore pre-assembled.

    Access from above to the tightening element is possible due to the specially designed housing. Concealed installation of the connectors is therefore possible (e.g. with shelves) and tightening via a Ø 10 mm through hole. The through hole is then concealed using a cover cap.

    Comfortable tightening of the connector from underneath with screwdriver in 25° position.

  • 라픽스 20 및 30 설치 옵션
  • Montage

    Die Verbindergehäuse Rafix 20 und 30 weisen zur Aufnahme eines Verbindungsbolzens zwei Ausführungen auf:

    (1) ohne Wulst:

    (2) mit Wulst:

    Die Konstruktionsbödenkönnen stirnseitig und von oben eingesetzt werden.

    Die Konstruktionsböden können nur von oben eingesetzt werden; dadurch sind die Bauteile vorfixiert.

    Durch die spezielle Konstruktion der Gehäuse ist ein Zugriff von oben auf das Anzugselement möglich. Dadurch können die Verbinder, z.B. bei Bodentablaren, verdeckt eingebaut und über eine 10-mm-Durchgangsbohrung verspannt werden. Die Durchgangsbohrung wird danach mit einer Abdeckkappe verdeckt.

    Das Anziehen des Verbinders von unten erfolgt komfortabel durch 25°-Stellung des Schraubendrehers.

  • 라픽스 20/라픽스 탭 20의 빠른 비교 정보
  • Rafix 20
    • Connector housing made from zinc alloy or plastic
    • Connector housing without dowel
    • With tightening element for tightening and fixing of the components
    • Only one drill hole
    • Small design
    • With or without rim (zinc alloy housing available only with rim)
    Rafix 20 Tab
    • Shelf connector housing made from plastic
    • Shelf connector without dowel
    • Without tightening element
    • With design and drilling dimensions identical to Rafix 20
    • Tightening in slightly angled position
    • Installation and removing by pushing on and lifting the connecting bolt, no tools required
    • With rim

    Filter

    Complete your selection

    접시형 절단날 포함 – 목재 두께: 19 mm, 시계방향 회전

    물품 번호 001.24.327

    물품 번호 001.24.327

    null 검색 결과가 없습니다.

    도움말

    도움말

    문의한 수량을 즉시 공급할 수 있습니다.
    문의한 수량을 곧 공급할 수 있고, 경우에 따라 일부 수량을 즉시 공급할 수 있습니다.
    해당 물품을 더 이상 공급할 수 없습니다.

    안내:
    즉시 공급 가능한 물품의 부분 배송을 원하시는 경우 주문 완료 시 선택할 수 있습니다.

    ST 최소 1
    장바구니에 추가

    Looks like you don't have permission to add this product to your cart. Kindly get in touch with your sales representative for assistance.

    물품 세부정보

    Version

    오른쪽 런닝 방향

    For wood thickness

    19 mm

    Drill bit length

    47 mm

    Area of application

    접시머리 림이 있는 라픽스 20에 적합

    Version

    하드 메탈 팁 컷팅 엣지 3개, 샤프트 Ø 10 mm, 플랫 사이드 및 조절 스크류 M5 x 8 mm 1개

    Drill hole Ø

    20 mm
    Corporate Office: Häfele America Co., 3901 Cheyenne Drive, Archdale, N.C. 27263
    Phone: 800.423.3531, Fax: 800.325.6197, Local Phone: 336.434.2322, Email: info@haefeleamericas.com
    2021-04-23

    드릴 비트,헤펠레 라픽스 20 하우징 커넥터

    접시형 절단날 포함 – 목재 두께: 19 mm, 시계방향 회전

    참조: 그림에 표시된 물품은 경우에 따라 유사한 물품일 수 있습니다.