- 홈
- 제품
- 가구, 키친 & 거실 솔루션
- 커넥터 & 선반 지지대
- 커넥터
- 커넥터 하우징,시스템 라픽스 20, 플라스틱, 플러시 설치
커넥터 하우징,시스템 라픽스 20, 플라스틱, 플러시 설치
플러그 없음, 리지 없음, 조임 부품
- 라픽스 커넥터 하우징 개요
- Connector housing made from zinc alloy or plastic
- Connector housing without dowel
- With tightening element for tightening and fixing of the components
- Only one drill hole
- Small design
- With or without rim (zinc alloy housing available only with rim)
- Connector housing made from zinc alloy or plastic
- Connector housing without dowel
- With tightening element for tightening and fixing of the components
- Can be used for alignment, the dowel provides accurate positioning
- Better pull-out strengths
- Valuable, robust appearance
- Shelf connector housing made from plastic
- Shelf connector without dowel
- Without tightening element
- With design and drilling dimensions identical to Rafix 20
- Tightening in slightly angled position
- Installation and removing by pushing on and lifting the connecting bolt, no tools required
- With rim
- Connector housing made from plastic
- Connector housing with dowel
- With tightening element made from zinc alloy for tightening and fixing of the components
- Can be used for alignment, the dowel provides accurate positioning
- High tolerance range (± 0.5 mm), compensation through long tightening distance (2.5 mm)
- High pull-out strengths
- For heavy loads
- 라픽스 20 및 30 설치 옵션
- 라픽스 20/라픽스 탭 20의 빠른 비교 정보
- Connector housing made from zinc alloy or plastic
- Connector housing without dowel
- With tightening element for tightening and fixing of the components
- Only one drill hole
- Small design
- With or without rim (zinc alloy housing available only with rim)
- Shelf connector housing made from plastic
- Shelf connector without dowel
- Without tightening element
- With design and drilling dimensions identical to Rafix 20
- Tightening in slightly angled position
- Installation and removing by pushing on and lifting the connecting bolt, no tools required
- With rim
| Rafix 20 |  | ||
 | |||
| Rafix 20 Tab |  | ||
| Rafix 30 |  | ||
Montage
Die Verbindergehäuse Rafix 20 und 30 weisen zur Aufnahme eines Verbindungsbolzens zwei Ausführungen auf:
(1) ohne Wulst: |  |  | (2) mit Wulst: |  |  | |||||
Die Konstruktionsbödenkönnen stirnseitig und von oben eingesetzt werden. | Die Konstruktionsböden können nur von oben eingesetzt werden; dadurch sind die Bauteile vorfixiert. | |||||||||
 | |
Durch die spezielle Konstruktion der Gehäuse ist ein Zugriff von oben auf das Anzugselement möglich. Dadurch können die Verbinder, z.B. bei Bodentablaren, verdeckt eingebaut und über eine 10-mm-Durchgangsbohrung verspannt werden. Die Durchgangsbohrung wird danach mit einer Abdeckkappe verdeckt. Das Anziehen des Verbinders von unten erfolgt komfortabel durch 25°-Stellung des Schraubendrehers. |
| Rafix 20 | | ||
| Rafix 20 Tab | | ||
-
카탈로그 링크를 사용할 수 있습니다.
물품을 선택하십시오.
Filter
Complete your selection
| Corporate Office: Häfele America Co., 3901 Cheyenne Drive, Archdale, N.C. 27263 Phone: 800.423.3531, Fax: 800.325.6197, Local Phone: 336.434.2322, Email: info@haefeleamericas.com |
커넥터 하우징, 시스템 라픽스 20, 플라스틱, 플러시 설치
플러그 없음, 리지 없음, 조임 부품 –
참조: 그림에 표시된 물품은 경우에 따라 유사한 물품일 수 있습니다.
참조
물품을 장바구니에 추가하려면, 특징 또는 물품표를 이용하여 물품을 선택하십시오.
