락킹 볼트,에스파뇰레트 락의 프로파일 막대용, 스크류온 플레이트

아연합금

물품 번호 226.57.708

  • Drehstangen-Schloss-System Piccolo-Nova

     

    für geteilte Profilstangen Durchmesser 6 mm

    Das Drehstangen-System Piccolo-Nova mit schmalem Schlosskasten ist eine vielfach erprobte Lösung für jede Einbausituation. Es umfasst Schlösser mit Zuhaltungen, Plättchen- und Stiftzylindern sowie Vierkantnuss und/oder Schlossrosette zur Kombination mit Aufbausystemen.

    Die beiden erhältlichen Dornmaße 15 mm und 25 mm ermöglichen bei Eck- und Reihenschränken bei gleichem Bohrbild ein identisches Fugenmaß.

     
     
     

    Beispiel: Maße bei 19 mm Holzdicke und 3 mm Fuge (die farbigen Maße dürfen nicht verändert werden)

    Übersicht über das Drehstangen-Schloss-System Piccolo-Nova

     
  • Drehstangen‐Schloss‐System Standard‐Nova

    für geteilte Profilstangen Durchmesser 8 mm

    Das Drehstangen‐System Standard‐Nova mit breitem Schlosskasten ist eine bewährte Standard‐Lösung für jede Einbausituation. Es umfasst Schlösser mit Plättchen‐ und Stiftzylindern sowie Vierkantnuss und/oder Schlossrosette zur Kombination mit Aufbausystemen.

    Übersicht über das Drehstangen‐Schloss‐System Standard‐Nova

     
  • Symo is a modular cylinder core system from Häfele. Without tools and time-consuming installation, it provides maximum flexibility at minimum costs and effort.

     

    Due to the variety of components within the Symo system, all present and future applications can be covered – and all this with maximum freedom during planning and execution.

     

    All components of the Symo system can be combined as required and exchanged, modified or upgraded at any time.

     

    Locking plans can be modified easily, quickly and economically. Only the cylinder core is replaced (without tools), the lock - and therefore the piece of furniture - remains untouched.

    Rational furniture production

    Since the lock and the cylinder core are separated, the locks can be pre-mounted in the furniture and are fully functional through their protective caps. The protective caps can be replaced easily and without tools by the required cylinder core at any time. The furniture can therefore be produced independently from its future use and from the required locking plans, and can be equipped with the required locks. This allows rational mass-production. The individual locks can be integrated into the locking plan by inserting the cylinder cores at any time, even after the furniture has been set up.

    Inserting and removing cylinder cores without tools

    No tools are required for inserting and removing the cylinder cores, which can also be done at any time after the locks have been installed. The cylinder cores can only be inserted or removed with the lock in open position. The cylinder can be removed using a removal key.

    Maintain the cylinder cores every 6 month, but do not treat the cylinder cores with graphite!

    Flexibility and economic efficiency – at any time

    Previously, removals, changed locking plans and security requirements as well as lost keys were the weak points of every locking plan which always required time-consuming and costly modification measures. Symo provides maximum flexibility even years after completion. Simply replace the cylinder cores to adapt the furniture locking concept to changed requirements. No tools are required and the installation is fast and simple. Whatever the requirements are: Symo is prepared.

     

    Plate cylinder or pin tumbler cylinder?

    With the Symo locking system you can choose between plate cylinders and pin tumbler cylinders.

     
     
     
     
     
    UniversalUniversal Objekt
     
     
     
     
     
     
     
     
     
     
     
     
     
     

    Premium 5

    Premium 20

    One protective cap, several functions !

     

     
     

    The protective caps for the Symo locks not only protect the interior of the cylinder housing against dirt or damages during the construction phase, but also function as temporary construction keys that can be operated with a coin or screwdriver due to their design. After construction is completed, the protective caps can be removed easily without tools and replaced by the required cylinder cores.

    아연합금

    물품 번호 226.57.708

    물품 번호 226.57.708
    도움말

    도움말

    문의한 수량을 즉시 공급할 수 있습니다.
    문의한 수량을 곧 공급할 수 있고, 경우에 따라 일부 수량을 즉시 공급할 수 있습니다.
    해당 물품을 더 이상 공급할 수 없습니다.

    안내:
    즉시 공급 가능한 물품의 부분 배송을 원하시는 경우 주문 완료 시 선택할 수 있습니다.

    ST 최소 1
    요구되는 필수 제품
    물품 세부정보

    Material

    아연합금

    Installation

    스크류 고정(슬롯으로 조절)
    정보 더보기
    21-8월-2019

    락킹 볼트,에스파뇰레트 락의 프로파일 막대용, 스크류온 플레이트

    아연합금

    참조: 그림에 표시된 물품은 경우에 따라 유사한 물품일 수 있습니다.

    참조

    물품을 장바구니에 추가하려면, 특징 또는 물품표를 이용하여 물품을 선택하십시오.