캠 락,사이모, 스크류온 플레이트, 직선 캠

사이모 코어 분리형 실린더와 결합

  • 캠 락 클로저 행정 및 클로저 방향에 대한 정보
  • Befestigung

    Hebelschlösser können auf zwei Arten befestigt werden, die je nach Einsatzbereich, insbesondere abhängig von Türdicke und ‐material, die Wahl des Schlosses bestimmen: entweder Mutternbefestigung oder Klammerbefestigung.

    Mutternbefestigung mit Sechskantmutter

    Das Schloss wird in die vorbereitete Bohrung geschoben und auf der Innenseite mit einer Sechskantmutter (liegt dem Schloss bei) befestigt.

    Durch zusätzliche Verdreh‐Sicherungsscheiben wird das Schloss vor gewaltsamem Verdrehen geschützt. Für den Einbau in dünne Türen kann das Schloss mit Distanzscheiben versehen werden. Danach wird der Hebel (Position abhängig von gewünschtem Schließweg) montiert.

    Klammerbefestigung

    Bei dünnen Türen (z. B. Stahltüren) wird häufig die Klammerbefestigung gewählt. Das Schloss wird durch eine an der Innenseite der Tür anzubringende Klammer befestigt. Diese Klammer schützt gleich­zeitig das Schloss gegen gewaltsames Verdrehen. Danach wird der Hebel (Position abhängig von gewünschtem Schließweg) montiert.

    Schließweg

    Bei den Hebelschlössern wird der Schließweg mit Buchstaben oder Ziffern angegeben. Diese beziehen sich auf die in den Tabellen dargestellten Einbausituationen. Schlösser mit Schließweg 180° können für alle Schließwege umgebaut werden, Lieferzustand ist Schließweg 1.

    Schlösser mit Schließweg 90° werden in links‐ bzw. rechtsschließende Schlösser unterschieden. Hier wird die Schließrichtung mit Hilfe von ­Buchstaben angegeben. Der voranstehende Buchstabe kennzeichnet den Lieferzustand, die in Klammern stehenden Schließwege können durch Umstecken des Schließhebels eingestellt werden (Beispiel: Schließweg A (D, F, G)).

    Schließweg für Hebelschlösser 90°

    Schließweg für Hebelschlösser 180°

    Schließrichtung links

    Schließrichtung rechts

    Schließzwang

     
     

    Viele Hebelschlösser haben Schließzwang. Dies bedeutet, dass der Schlüssel nur abgezogen werden kann, wenn das Schloss abgeschlossen wurde.

  • 사이모 실린더 코어
  • Symo is a modular cylinder core system from Häfele. Without tools and time-consuming installation, it provides maximum flexibility at minimum costs and effort.

     

    Due to the variety of components within the Symo system, all present and future applications can be covered – and all this with maximum freedom during planning and execution.

     

    All components of the Symo system can be combined as required and exchanged, modified or upgraded at any time.

     

    Locking plans can be modified easily, quickly and economically. Only the cylinder core is replaced (without tools), the lock - and therefore the piece of furniture - remains untouched.

    Rational furniture production

    Since the lock and the cylinder core are separated, the locks can be pre-mounted in the furniture and are fully functional through their protective caps. The protective caps can be replaced easily and without tools by the required cylinder core at any time. The furniture can therefore be produced independently from its future use and from the required locking plans, and can be equipped with the required locks. This allows rational mass-production. The individual locks can be integrated into the locking plan by inserting the cylinder cores at any time, even after the furniture has been set up.

    Inserting and removing cylinder cores without tools

    No tools are required for inserting and removing the cylinder cores, which can also be done at any time after the locks have been installed. The cylinder cores can only be inserted or removed with the lock in open position. The cylinder can be removed using a removal key.

    Maintain the cylinder cores every 6 month, but do not treat the cylinder cores with graphite!

    Flexibility and economic efficiency – at any time

    Previously, removals, changed locking plans and security requirements as well as lost keys were the weak points of every locking plan which always required time-consuming and costly modification measures. Symo provides maximum flexibility even years after completion. Simply replace the cylinder cores to adapt the furniture locking concept to changed requirements. No tools are required and the installation is fast and simple. Whatever the requirements are: Symo is prepared.

     

    Plate cylinder or pin tumbler cylinder?

    With the Symo locking system you can choose between plate cylinders and pin tumbler cylinders.

     
     
     
     
     
    UniversalUniversal Objekt
     
     
     
     
     
     
     
     
     
     
     
     
     
     

    Premium 5

    Premium 20

    One protective cap, several functions !

     

     
     

    The protective caps for the Symo locks not only protect the interior of the cylinder housing against dirt or damages during the construction phase, but also function as temporary construction keys that can be operated with a coin or screwdriver due to their design. After construction is completed, the protective caps can be removed easily without tools and replaced by the required cylinder cores.

    Filter

    Complete your selection

    도움말

    도움말

    문의한 수량을 즉시 공급할 수 있습니다.
    문의한 수량을 곧 공급할 수 있고, 경우에 따라 일부 수량을 즉시 공급할 수 있습니다.
    해당 물품을 더 이상 공급할 수 없습니다.

    안내:
    즉시 공급 가능한 물품의 부분 배송을 원하시는 경우 주문 완료 시 선택할 수 있습니다.

    NONE 최소 1

    235.59.600 Lever lock Symo ni.pl.A 180°

    사이모 코어 분리형 실린더와 결합 –, 클로져 방향: A

    235.59.601 Lever lock Symo ni.pl.A 90°

    사이모 코어 분리형 실린더와 결합

    235.59.610 Lever lock Symo ni.pl.B 180°

    사이모 코어 분리형 실린더와 결합 –, 클로져 방향: B

    235.59.611 Lever lock Symo ni.pl.B 90°

    사이모 코어 분리형 실린더와 결합

    제품 세부 내용

    Area of application

    전면에서 직접 삽입하는 실린더 코어

    Material

    아연합금

    Finish

    니켈 도금

    For door thickness

    최대 22 mm

    Cylinder housing length

    22 mm

    Closure travel

    90° 락킹 캠(역방향 가능), 180° 키

    Installation

    스크류온 플레이트로 스크류 고정
    제품 기능

    Supplied with

    캠 락 1개

    락킹 캠 1개(사전 장착)

    설치 스크류 1개(사전 설치)

    와셔 1개(사전 설치)

    Corporate Office: Häfele America Co., 3901 Cheyenne Drive, Archdale, N.C. 27263
    Phone: 800.423.3531, Fax: 800.325.6197, Local Phone: 336.434.2322, Email: info@haefeleamericas.com
    2020-11-30

    캠 락,사이모, 스크류온 플레이트, 직선 캠

    사이모 코어 분리형 실린더와 결합

    참조: 그림에 표시된 물품은 경우에 따라 유사한 물품일 수 있습니다.