DIY Cutting Board with Auro Oil

DIY cutting board!

Make a safe cutting board with Hafele Auro Oil, which is made from pure plant-based ingredients.

Step1.

1. Start with 120 grit to clean up curves and sharp edges.

2. Sand it again with 180-220 grit to make it smooth.

3. Spray the entire thing down with water and dry completely.
 

Step2.

1. Clean up the surfaces with 120-180 grit.

2. Use Auro oil no.126 to coat on, wait for 10 minutes and wipe off the excess, rinse and repeat for one more time.

3. Dry it for 24 hours and finish.

※ Cautions!

1. Mix it well before using.

2. Natural oils have a low flash point and may spontaneously ignite after use. Towels or cloths soaked in oil should be spread out and dried before discarding.

※ Product features

• Protect the wood surface and prevents warping
• Natural vegan product without petrochemical ingredients
• Easy absorption and discharge of moisture with excellent moisture permeability
• Light honey color